CYP IP-CS7, Operation Manual, Page: 29 / 36

29
6.8.7 Receiver Tab
This tab provides a way to control the detailed settings of each detected
Receiver. After all desired changes have been completed, press the “Apply”
button to send the changes to the appropriate Receivers and activate
them. After receiving the new settings, each Receiver will reboot.
i
This tab is not available when the user is logged out.
Receiver Configuration
-
Hello:
Clicking on this switch will cause the selected unit to
immediately begin flashing the LEDs on the front of the unit to make
it easy to find. Clicking it a second time returns the LEDs to their
normal behavior.
-
MAC Address:
Displays the unit’s detected MAC address.
-
Name:
The unit’s assigned name can be changed here. Up to 12
alpha-numeric characters are allowed. By default, new units will use
their MAC address as their name.
-
Channel: Use the dropdown to select the broadcast reception
channel for the Receiver. The Receiver will display the video stream
from the Transmitter using the selected broadcast channel. The
available channel range is from 0 to 255.
- Casting Mode:
Use the dropdown to switch the network broadcast
mode supported by the unit between Multicast and Unicast.
i
Receivers must be set to the same casting mode as the Transmitter in
order to receive video.