CYP IP-CS7, Operation Manual, Page: 16 / 36

16
INDIVIDUAL VOIP UNIT COMMANDS
DESCRIPTION PARAMETERS
SET_DEVICE_NAME N1 N2

Set the name of the Tx or Rx at IP
address N1. N1 = X.X.X.X [X = 0 ~ 255,
IP of Target Unit]
N2
= {Name} [Alpha-numeric,
12 Chars Max]
GET_DEVICE_NAME N1

Show the current name of the Tx or
Rx at IP address N1.
N1
= X.X.X.X [X = 0 ~ 255,
IP of Target Unit]
SET_NET_MODE N1 N2

Set the network broadcast mode
of the Tx or Rx at IP address N1. N1 = X.X.X.X [X = 0 ~ 255,
IP of Target Unit]
Available values for N2 :
0 [Unicast Mode]
1 [Multicast Mode]
GET_NET_MODE N1

Show the current network
broadcast mode of the Tx or Rx at
IP address N1.
N1
= X.X.X.X [X = 0 ~ 255,
IP of Target Unit]
SET_VW_LAYOUT N1 N2 N3

Set the horizontal and vertical
display count of the video wall that
the Rx at IP address N1 is a part of.
N1
= X.X.X.X [X = 0 ~ 255,
IP of Target Unit]
N2
= 1 ~ 16 [Horizontal Display
Count]
N3
= 1 ~ 16 [Vertical Display
Count]