CYP IP-CS7, Operation Manual, Page: 28 / 36

28
i
This tab is not available when the user is logged out.
Transmitter Configuration
- Hello:
Clicking on this switch will cause the selected unit to
immediately begin flashing the LEDs on the front of the unit to make
it easy to find. Clicking it a second time returns the LEDs to their
normal behavior.
-
MAC Address:
Displays the unit’s detected MAC address.
-
Name:
The unit’s assigned name can be changed here. Up to 12
alpha-numeric characters are allowed. By default, new units will use
their MAC address as their name.
-
Channel: Use the dropdown to select the broadcast channel for the
Transmitter. All Receivers on the local network that are set to the
same channel will receive video from this Transmitter. The available
channel range is from 0 to 255.
i
Every Transmitter within the same local network must be assigned a
different broadcast channel in order to avoid conflicts.
- Casting Mode:
Use the dropdown to switch the broadcasting mode
used by the unit between Multicast and Unicast.
i
Receivers must be set to the same casting mode as the Transmitter in
order to receive video.
-
IP Mode & IP Settings:
The IP mode of each unit may be switched
between “Auto IP”, “DHCP” or “Static IP”. When the unit is set to Auto
IP mode it will automatically assign itself an APIPA address from the
169.254.XXX.XXX range. When the unit is set to DHCP mode it will
attempt to automatically obtain an IP address from a DHCP server.
When the IP mode is set to static IP, you can manually set the IP
address, netmask and gateway address.
i
The default network setting is “Auto IP”.
- Serial Settings:
Set the desired baud rate, data bits, parity, and stop
bits for the unit’s RS-232 extension function.
i
Linked Transmitters and Receivers must have the same serial settings.