CYP IP-CS7, Operation Manual, Page: 15 / 36

15
DISCOVERY SERVICE COMMANDS
DESCRIPTION PARAMETERS
GET_RX_DEVICE

List all supported VoIP Receiver
devices detected on LAN port 1’s
local network.
MACRO/GROUP COMMANDS
DESCRIPTION PARAMETERS
MACRO_RUN N1

Run preset (macro) N1. N1 = 1 ~ 255 [Preset Number]
GET_MACRO_RUN N1

List the contents of preset (macro)
N1.
N1
= 1 ~ 255 [Preset Number]
SET_GROUP_ROUTE N1 N2

Set all members of Group N1 to
display Channel N2.
N1
= 1 ~ 255 [Group Number]
N2
= 0 ~ 255 [Channel Number]
GET_GROUP_MEMBER N1

List all Receivers in group N1. N1 = 1 ~ 255 [Group Number]
INDIVIDUAL VOIP UNIT COMMANDS
DESCRIPTION PARAMETERS
SET_CHANNEL N1 N2

Set the channel for the Tx or Rx at
IP address N1.
N1
= X.X.X.X [X = 0 ~ 255,
IP of Target Unit]
N2
= 0~255 [Channel Number]
GET_CHANNEL N1

Show the current channel used by
the Tx or Rx at IP address N1. N1 = X.X.X.X [X = 0 ~ 255,
IP of Target Unit]