CYP IP-CS7, Operation Manual, Page: 27 / 36

27
Display Group Configuration
The Display Group device selection window provides a way to define a
group of displays that will all receive the same routed source when used
in Presets or from the Monitor & Control tab.
The name of the Display Group is set at the top of the window. To add
Receivers to the Display Group, click on the name of each one to include.
To remove a Receiver from the group, click on the Receiver’s name a
second time. After all selections have been made, click on the “Confirm”
button to save the changes.
6.8.6 Transmitter Tab
This tab provides a way to control the detailed settings of each detected
Transmitter. After all desired changes have been completed, press the
“Apply” button to send the changes to the appropriate Transmitters and
activate them. After receiving the new settings, each Transmitter will
reboot.