CYP CR-KP1, Operation Manual

Page: 39 / 48

39
COMMAND
Description and Parameters
set_cond N1 -- N2 N3

Set a temporary min/max value range for the specified Condition
port(s) and decrease the stored value by 1.
N1
= 1~64 [Condition port number]
N2
= 0~255 [Adjustment minimum value]
N3
= 0~255 [Adjustment maximum value]
Note: Multiple values may be entered for N1, N2 and N3 by separating
the values with commas. All 3 sets must have the same number of
values.
set_cond N1 led N2 N3

Bind the color of the specified button’s LED to the specified Condi-
tion port’s value.
N1 = 1~64 [Condition port number]
Available values for N2 :
0 [Disable LED condition check]
1~15 [Button LED pair to control]
Available values for N3 :
TRUE [Set LED to RED on “1” or BLUE on “0”]
FALSE [Set LED to RED on “0” or BLUE on “1”]
Note: Multiple values may be entered for N1, N2 and N3 by separating
the values with commas. All 3 sets must have the same number of
values.
get_cond

List the current state of all Condition ports.
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.