34
6.6 Serial and Telnet Commands
COMMAND
Description and Parameters
help
Show the full command list.
?
Show the full command list.
help N1
Show details about the specified command.
N1
= {Command Name}
ver
Show the unit's current firmware version.
fadefault
Reset the unit to the factory defaults.
eth_fadefault
Reset the unit’s network settings to the factory defaults.
reboot
Reboot the unit.
ipconfig
Show the unit's current IP configuration information.
sipmode N1
Set the IP address assignment mode.
Available values for
N1
:
STATIC
[Static IP mode]
DHCP
[DHCP mode]
Summary of Contents for CR-KP1
