CYP CH-2535RX, Operation Manual

Page: 26 / 88

21
2. Input Commands
COMMAND DESCRIPTION AND PARAMETERS
GET IN PORT NUMBER

Show the system input port number.
GET IN TYPE LIST

Show the system input’s type.
SET IN N1 EDID N2

Assign EDID N2 to input N1.
N1 = 1 ~ 4 [Input number]*
Available values for N2:
1 [Internal FHD 2CH]
2 [Internal FHD MCH]
3 [Internal UHD 2CH]
4 [Internal UHD MCH]
5 [Internal UHD+ 2CH]
6 [Internal UHD+ MCH]
7 [User 1]
8 [User 2]
9 [User 3]
10 [User 4]
11 [HDMI Output]
12 [HDBaseT Output]
GET IN N1 EDID

Display input N1’s EDID source.
N1 = 1 ~ 4 [Input number]*
SET IN N1 HDCP MODE N2

Set input N1’s HDCP mode.
N1 = 1 ~ 4 [Input number]*
Available values for N2:
0 [HDCP Off]
1 [Refer to Source]
2 [Refer to Display]
GET IN N1 HDCP MODE

Show input N1’s HDCP mode.
N1 = 1 ~ 4 [Input number]*
GET IN N1 HDCP STATUS

Show input N1’s current HDCP status.
N1 = 1 ~ 4 [Input number]*
GET IN N1 FORMAT

Show input N1’s current format.
N1 = 1 ~ 4 [Input number]*
Note: Only the currently active input
can be read.