CYP CH-2535RX, Operation Manual

Page: 32 / 88

27
4. Control System Commands
COMMAND DESCRIPTION AND PARAMETERS
GET EVENT N1 CONDITION

Show Event N1’s activation condition
(conditions displayed depend on the
Event type).
N1 = 1 ~ 64 [Event number]
SET EVENT N1 MODE N2

Set Event N1 to use activation mode
N2.
N1 = 1 ~ 64 [Event number]
Available values for N2:
1 [Once]
2 [Single Mode]
3 [Repeat Mode]
4 [Toggle Mode]
GET EVENT N1 MODE

Show Event N1’s activation mode.
N1 = 1 ~ 64 [Event number]
SET EVENT N1 MACRO N2

Assign macro N2 to Event N1.
N1 = 1 ~ 64 [Event number]
N2 = 1 ~ 64 [Macro number]
GET EVENT N1 MACRO

Show the macro currently assigned
to Event N1.
N1 = 1 ~ 64 [Event number]
SET EVENT N1 TOGGLE MACRO N2

Assign the secondary macro to use
when Event N1 is set to toggle mode.
N1 = 1 ~ 64 [Event number]
N2 = 1 ~ 64 [Macro number]
GET EVENT N1 TOGGLE MACRO

Show Event N1’s secondary macro
when in toggle mode.
N1 = 1 ~ 64 [Event number]
SET EVENT N1 TIMER N2

Set Event N1’s hold timer duration to
N2 seconds.
N1 = 1 ~ 64 [Event number]
N2 = 0 ~ 65535 [Seconds]
Note: Not used in all Event modes.