CYP CH-2535RX Page 63 Operation Manual Download

Page: 63 / 88

Event Mode:

Displays the currently selected behavior for the

Event. Events can have one of the following mode types.

Once:

The Event’s macro is run one time when triggered and

then will not be activated again. If the unit is rebooted, all

“Once” Events will become active again.

Single:

The Event’s macro is run a single time each time the

Event is triggered.

Repeat:

The Event’s macro is repeatedly run a pre-determined

number of times (up to 255) each time the Event is triggered.

A delay time between each repeat can be set.

Toggle:

The Event runs alternating macros (a single time for

each trigger) each time the Event is triggered.

Macro:

Displays the name of the macro to run when the Event is

triggered.

Edit/New:

Click the “Edit” or “New” button to open the Event Edit

window and edit an existing Event, or create a new one. When

creating a new Event, as each field is completed, additional fields

will appear as parameters are filled in, as appropriate to the Event

type and selections made. Once the Event is completely defined,

click “Save” to store the Event.

Delete:

Click to delete an Event.

Summary of Contents for CH-2535RX

























































































Search results

Summary of Contents for CH-2535RX

Reviews:

Related manuals for CH-2535RX

Brands by name

Popular brands

CYP CH-2535RX, Operation Manual

Search results

Summary of Contents for CH-2535RX

Reviews:

Related manuals for CH-2535RX

Brands by name

Popular brands