manualshive.com logo in svg

CYP CH-2535RX, Operation Manual, Page: 68 / 88

Share
Download
CYP CH-2535RX Operation Manual Download Page 68

63

9. Device

Click on the “Device” tab to add/remove common, or multiple-

use device interfaces to make setting up macros which repeatedly 

use the same interfaces much easier. There are 4 types of device 

interfaces (either Remote or Local) that can be defined for easy use 

with a total of 16 stored. The name of each device can be up to 32 

characters long (spaces are not allowed). Each defined device is 

directly linked to any macro commands that they have already been 

used in, so editing them will immediately change the behavior of the 

macros they are being used in.

Note: The Device tab is not available when the user is logged in using 

an “Operator” level account.

 -  

Device Name:

 Displays the device’s name.

 

-

 Interface: 

Displays the device’s selected interface type.

 -  

Configuration:

 Displays the configuration settings for the device.

 -  

Edit/New:

 Click the “Edit” or “New” button to open the Device 

Edit window. The setting fields displayed will be appropriate for the 

interface selected. Click on the “Save” button to save the device 

definition.

 

-

 Delete: 

Click the “Delete” button to delete the specified device.

Summary of Contents for CH-2535RX

























































































Reviews:

No comments