CYP CH-2535RX Page 54 Operation Manual Download

Page: 54 / 88

• Output HDMI/HDBaseT

A/B:

Buttons for selecting the Output (A or B) to route video or

audio sources to.

Name:

Displays the name for the Output. Click the icon to edit

the Output’s name.

Video:

Displays the Input that is currently routed to the Output.

Audio:

Displays the audio embedding mode for the Output.

Timing:

Displays the current output resolution and timing for the

Output.

Mask:

Click the switch to enable/disable the Output’s video mask

function (Off = normal video, On = black screen with sync).

Mute:

Click the switch to enable/disable the Output’s audio mute

function.

• Input Video Group

VGA/HDMI/DP/HDMI2:

Buttons for selecting the video Input to

route to the selected Output.

Name:

Displays the name for the Input. Click the icon to edit

the Input’s name.

Link:

Displays the Input’s source signal detection state.

Auto:

Click the switch to enable/disable auto source switching

functionality.

• Input Audio Group

Follow Video/Replaced from Ext L/R:

Buttons for selecting the

audio to embed with the video being routed to the selected

Output. When auto audio routing is enabled, manual selection is

disabled.

Auto:

Click the switch to enable/disable auto audio selection

functionality.

Summary of Contents for CH-2535RX

























































































Search results

Summary of Contents for CH-2535RX

Reviews:

Related manuals for CH-2535RX

Brands by name

Popular brands

CYP CH-2535RX, Operation Manual

Search results

Summary of Contents for CH-2535RX

Reviews:

Related manuals for CH-2535RX

Brands by name

Popular brands