15
Notes:
•
The OSD only provides controls for the collaboration Receiver’s
functions. To control the functions of both the collaboration
Transmitter and Receiver, please use the WebGUI or Telnet.
•
Items in Bold are factory default settings. The individual functions will
be introduced in the following paragraphs.
► Output Resolution
Due to the possibility of selecting an output resolution or format
that is not supported by the connected display, after selecting a
new resolution the OSD will display a confirmation screen. If “YES”
is not selected on the confirmation screen within 12 seconds, the
output resolution will change back to the previous setting.
When the output resolution is set to “Bypass”, the scaler in the
Receiver will be disabled and the “Output Image Adjust” menu will
be disabled and greyed out. However, the “Output Color Format”
menu’s options can still be adjusted.
► Output Color Format
Format:
If “Auto” is selected, and the sink’s EDID does not
correspond to the CEA-861 specifications, this will be set to HDMI.
Color Space:
The “YUV 4:2:0” color space can only be selected
when the output resolution is 4K@50Hz or 4K@60Hz. When the
Format is “DVI”, the color space selection will be grayed out and
automatically set to “RGB”.
Color Depth:
When the Format is “DVI” or the color space is
“YUV 4:2:2”, the Color Depth section will be grayed out and
automatically set to “8-bit”.
► HDMI Information
Notify:
When the input state changes, the OSD will automatically
display the currently detected input resolution for the selected
period of time.
When connected to a collaboration Transmitter the OSD Info
function will be replaced by the Transmitter’s OSD Banner and
controlled via the WebGUI's settings.
► EDID Control
Input EDID:
When connected to a collaboration Transmitter,
the “HDBT Input EDID” section will be grayed out because the
Summary of Contents for CH-2535RX
Page 2: ......
Page 88: ...CYPRESS TECHNOLOGY CO LTD www cypress com tw ...