CYP CH-2535RX Page 55 Operation Manual Download

Page: 55 / 88

2. EDID

This collaboration Transmitter provides the option of six internal EDIDs,

four customer uploaded EDIDs, and two sink sourced EDIDs that can

be assigned to each input port individually. All EDIDs are available for

download and saving to a PC. Important details from each EDID may

also be displayed.
This tab allows for the assignment of an EDID to each individual input

port, or to all inputs at once. Click as many of the Input EDID buttons

on the left as desired and then select the preferred EDID from the

buttons displayed on the right. The new EDID will become active

immediately.

Note: In some rare cases it is possible for user or external EDIDs to

cause compatibility issues with certain sources. If this happens, it is

recommended to switch to one of the 6 internal EDIDs for maximum

compatibility.

Summary of Contents for CH-2535RX

























































































Search results

Summary of Contents for CH-2535RX

Reviews:

Related manuals for CH-2535RX

Brands by name

Popular brands

CYP CH-2535RX, Operation Manual

Search results

Summary of Contents for CH-2535RX

Reviews:

Related manuals for CH-2535RX

Brands by name

Popular brands