Cylinda DM8330 FI, User Manual

Page: 35 / 44

Troubleshooting
Action Type of fault on the display
Clear the drainage pump. See the chapter Care and cleaning. If the problem
persists, call the service department. Overfilling F10
See “Water remains in the dishwasher” in the table “Problem” below. If the problem
persists, call the service department. Water outlet fault F11
Check that the water tap is on. If the problem persists, call the service department. Water inlet fault F12
Turn off the water tap and call the service department. Inlet valve leakage F40
Clean the coarse and fine filters. If the problem persists, call the service depart-
ment. Water level fault F52
Turn off the water tap and call the service department. Overfilling F54
Call the service department. Circulation fault F56
Press any button to clear the error message.
Action Possible causes Problem
Wait a moment then try again. You have pressed the buttons too soon
after opening the door. The buttons do not react when pressed.
Clean with a dry or slightly damp cloth. The buttons are dirty.
Open the door. The buttons only react
to use when the door is open. The door is closed.
Check that the baskets are correctly po-
sitioned horizontally. The baskets are not correctly positioned. Cannot close door.
Check that the dishes are not blocking
the baskets from sliding properly into
place.
Check the door lock. If it does not click
into place and lock, open the door. Press
and hold the button for the Auto open
option for 15 seconds. Then wait 30
seconds. Close the door. Check that the
door lock clicks into place and locks. The door lock does not click into place
and lock.
35
EN