Cylinda DM8330 FI, User Manual

Page: 32 / 44

Options Settings
Adjusting the water softener. Select a setting depending
on the hardness of the water supply. It is important that
this setting is correct! 2:00 - 2:09 Water hardness 2.
Recommended
setting French water
hardness scale German water
hardness scale
2:00 0-9°fH 0-5°dH
2:01 10-14°fH 6-8°dH
2:02 15-20°fH 9-11°dH
2:03 21-25°fH 12-14°dH
2:04 26-34°fH 15-19°dH
2:05 35-43°fH 22-24°dH
2:06 44-52°fH 25-29°dH
2:07 53-70°fH 30-39°dH
2:08 71-88°fH 40-49°dH
2:09 89°fH 50°dH
Do not forget to put salt in the salt compartment after
you have set the water softener to 2:01 - 2:09.
For a water supply with a hardness under 6°dH (9°fH),
select 2:00. The water softener is deactivated and no
salt is needed.
Pre-selected at factory: 04
You can activate this setting when using 3-in-1/ All-in-
one detergent. The dishwashing programmes automat-
ically adapt to provide the best possible dishwashing
and drying results every time. If this setting is activated
there is no need to add rinse aid since this option dis-
ables rinse aid dispensing. It also reduces the amount
of salt added to the water softener. Note that salt must
be put in the salt compartment. 3:00 (Off)
3:01 (On) TAB
(3-in-1/all-in-one detergent)
3.
NOTE!
In order to achieve good dishwashing results, it is
essential to check which type of detergent or all-in-
one product best suits your needs! Read the deter-
gent packaging carefully for information on proper
use. Always follow the directions for use or informa-
tion on the detergent packaging!
The dishwasher uses a buzzer to indicate when a pro-
gramme is finished or when a fault has occurred. 4:00 - 4:03 Buzzer volume 4.
32