Action
Possible causes
Problem
Clean the coarse and fine filters.
The filters are blocked.
Water remains in the dishwasher.
Check that the filter handle is locked in
the stop position. The handle should
point straight out from the dishwasher.
The filters are not fitted correctly.
Clean the drainage pump. See the
chapter Care and cleaning.
Debris in the drainage pump.
Check that the coloured stop on the right
in the bottom drain is in place. See the
chapter Care and cleaning.
Drainage pump stop missing.
Check that the hose is free from kinks
and sharp bends.
Kink in drainage hose.
Disconnect the drainage hose where it
connects to the sink unit's water trap.
Check that no debris has fastened and
that the connection has an inner diamet-
er of at least 14 mm.
Blocked drainage hose.
Clean with washing-up brush and low
foaming cleaner.
Dirt around the seals and in corners.
Bad odour in dishwasher.
Run a programme with a higher temper-
ature about once a month.
Low temperature programmes have
been selected for a prolonged period.
Activate the Auto open option.
The Auto open option is not activated.
The dishes are not dry enough.
Fully load the dishwasher.
The dishwasher is not fully loaded.
Top up with rinse add or increase the
rinse aid dosage. See the sections Be-
fore washing for the first time and Set-
tings.
Rinse aid needs topping up or dosage
is set too low.
Inactivate the setting TAB (3-in-1/ All-in-
one detergent) and top up salt and rinse
aid.
3-in-1/ All-in-one detergent is used and
the setting TAB (3-in-1/ All-in-one deter-
gent) is activated.
38
Summary of Contents for DM8330 FI
Page 1: ...Bruksanvisning User manual DM8330 FI ...
Page 22: ...Egna noteringar 22 ...
Page 43: ...Your notes 43 EN ...
