![background image](http://html1.mh-extra.com/html/cybex/autoview-commander/autoview-commander_installer-user-manual_2703651024.webp)
AutoView Commander Installer/User Guide
18
Operation
Procedure
Move the ID Window
Use the arrow keys or mouse to move the ID
Window's position on the monitor. If the window
flickers but does not move, continue tapping the
arrow keys until it moves back into range.
Change window background color
Press the <PAGE UP> key to cycle through the
available window background colours.
Change text colour
Press the <PAGE DOWN> key to cycle through
the available text colours.
Change window size
Use the (+) and (-) keys to change the length of
the ID Window.
The ID Window appears when you change channels and displays the
name of the selected channel. This window can be individually configured
for each channel in your system. The characteristics of the ID Window
can be changed from the Channel Maintenance Menu. This option is
only available if you are operating in non-secure mode or if you are the
system administrator.
Changing the Size, Colour and Position of the ID Window
1. From the main OSD Window, press the
Control
key twice or type
Alt-M
to access the Command Menu.
2. Select ‘Channel maintenance’ from the Command Menu.
3. Choose the option ‘Options for ID window’.
Follow the procedures outlined in the table below to change the size,
colour or position of your ID Window.
The ID Window
4. Press
Enter
to accept the changes or press
Esc
to exit the menu
without saving the changes.