![background image](http://html1.mh-extra.com/html/cybex/autoview-commander/autoview-commander_installer-user-manual_2703651031.webp)
25
Channel Scanning
Key Sequence
Action
<CM>
SG
<Enter>
Enables the scan Go command.
<CM>
SH
<Enter>
Enables the scan Halt command.
Setting the
Scanning Dwell
Time
For Alphanumeric Scanning
1. Highlight the channel that you wish to configure in the main
OSD Window.
.
2. Next, press the
Control
key twice or type
Alt-M
to access the
Command Menu.
3. Select ‘Channel Maintenance’ from the Command Menu.
4. Choose the option ‘Alpha Scan Dwell Time’.
5. Enter a number between 0-255 seconds. Enter
0
to skip a channel
during scanning.
For Sequential Scanning
1. From the main OSD Window, press the
Control
key twice or type
Alt-M
to access the Command menu.
2. Choose the option ‘Sequential Scan Dwell Time.’
3. Enter a number between 2-60 seconds. The value you enter will be
the dwell time for each active channel in the system.
By keyboard hot-key sequence (System Administrator or
non-secure mode only)
The following key sequences control scanning.
(System
Administrators and
non-secure mode
users.)