CYBEX Arc Trainer 600A, Owner'S Service Manual

Page: 44 / 107

Electrical Power Requirements
The power requirements for the Cybex Arc Trainer are a grounded circuit rated for one of the
following: 115 VAC ±5%, 50/60 Hz and 15 amps; or 230 VAC ±10%, 50/60 Hz. Contact your
electrician to ensure the power supply complies with local building codes.
NOTE: Do not use a
ground plug adapter to adapt the 3-prong power cord plug to a non-grounded electrical
outlet.
Up to three units can be daisy-chained together for single outlet use; order part number
367EW345 for each unit. The daisy-chain outlet is rated 115v 50/60Hz 4A (or 230v 50/60Hz
5A outside of the United States).
Assembling the Arc Trainer
! WARNING: Use extreme caution when assembling the unit. Failure to do so could
result in injury.
! CAUTION: A minimum of two people are required to assemble this unit.
Tools Required
• Phillips head screwdriver
• Hex key, 3/16” (supplied)
• 9/16” Open-end wrench
NOTE: The words “left” and “right” denote the user's orientation.
1. Read and understand all instructions thoroughly before assembling the unit.
NOTE: Each step number in the assembly instructions tells you what you will be doing. The
lettered steps following each step number describe the procedure required. Do not
continue with step 2 until you have carefully read all of the assembly instructions.
2. Verify you have received the correct package.
A. Read the sticker on the outside of the box and verify that the model number and
voltage are what you ordered.
3. Unpack and verify the contents of the boxes.
A. Lift up and remove the cardboard sleeve that surrounds the unit.
B. Verify that you have the color that you ordered by looking at the paint.
C. Verify that you have the correct voltage by reading the voltage sticker near the power
inlet.
Cybex Arc Trainer Owner’s & Service Manual
Page 5-2