33
Appendix C-ATS PDU Daisy-Chain Function
The daisy-chain function allows up to four ATS PDUs to be connected
together to be monitored and controlled from one IP address.
New LCD PDU Daisy-Chain Function Introduction
PDU81xxx/ 71xxx/ 41xxx/ 31xxx
The daisy-chain function allows up to four PDUs to be connected together to
be monitored and controlled from one IP address.
When PDUs are connected, two roles are defined: Host and Guest. Up to three
Guest PDUs can be connected to one Host PDU. The Guest PDUs will be
recognized by serial number and their order within the daisy-chain.
Note:
To perform the daisy-chain function, the firmware version of the
connected PDUs needs to be the same (v1.07 or above).
How to connect the PDUs together?
Use one Ethernet cable and connect one end of it to the daisy-chain (Out) port
on the Host PDU and the other end to the daisy-chain (In/ENV) port on the
Guest 1 PDU to connect the PDUs (as shown below).
Copyright © 2018 Cyber Power Systems, Inc. All rights reserved.
What remote management protocols are supported in PDU daisy-chains?
Currently users can monitor and control daisy-chained PDUs through Web
interface (HTTP/HTTPS) or SNMP protocols.
What functions on the Web pages does daisy-chain support?
Please find in below table:
Host ATS PDU
Out port
Guest #1 ATS PDU
In/ENV port
How to switch between Host and Guest PDUs on the Web interface?
Functionality supported by daisy-chained PDUs will have the Host/ Guest #
drop down menu displayed on the Web interface (as shown below).
Host
Guest #1
Guest #2
Guest #3
Ethernet
PDU
Device Status
Outlet Status
Device Manager
Outlet Manager
Outlet Control
Outlet Schedule
Log
Status Records
Energy Records
Graphing
System
Identification
Summary
When ATS PDUs are connected, two roles are defined: Host and Guest. Up
to three Guest ATS PDUs can be connected to one Host ATS PDU. The Guest
ATS PDUs will be recognized by serial number and their order within the
daisy-chain.
Note:
To perform the daisy-chain function, the firmware version of the
connected ATS PDUs needs to be the same (v1.2.2 or above).
How to connect the PDUs together?
Use one Ethernet cable and connect one end of it to the daisy-chain (Out)
port on the Host ATS PDU and the other end to the daisy-chain (In/ENV)
port on the Guest 1 ATS PDU to connect the ATS PDUs (as shown below).
New LCD PDU Daisy-Chain Function Introduction
PDU81xxx/ 71xxx/ 41xxx/ 31xxx
The daisy-chain function allows up to four PDUs to be connected together to
be monitored and controlled from one IP address.
When PDUs are connected, two roles are defined: Host and Guest. Up to three
Guest PDUs can be connected to one Host PDU. The Guest PDUs will be
recognized by serial number and their order within the daisy-chain.
Note:
To perform the daisy-chain function, the firmware version of the
connected PDUs needs to be the same (v1.07 or above).
How to connect the PDUs together?
Use one Ethernet cable and connect one end of it to the daisy-chain (Out) port
on the Host PDU and the other end to the daisy-chain (In/ENV) port on the
Guest 1 PDU to connect the PDUs (as shown below).
Copyright © 2018 Cyber Power Systems, Inc. All rights reserved.
What remote management protocols are supported in PDU daisy-chains?
Currently users can monitor and control daisy-chained PDUs through Web
interface (HTTP/HTTPS) or SNMP protocols.
What functions on the Web pages does daisy-chain support?
Please find in below table:
Host ATS PDU
Out port
Guest #1 ATS PDU
In/ENV port
How to switch between Host and Guest PDUs on the Web interface?
Functionality supported by daisy-chained PDUs will have the Host/ Guest #
drop down menu displayed on the Web interface (as shown below).
Host
Guest #1
Guest #2
Guest #3
Ethernet
PDU
Device Status
Outlet Status
Device Manager
Outlet Manager
Outlet Control
Outlet Schedule
Log
Status Records
Energy Records
Graphing
System
Identification
Summary
What remote management protocols are supported in ATS PDU
daisy-chains?
Currently users can monitor and control daisy-chained ATS PDUs through
Web interface (HTTP/HTTPS) or SNMP protocols.
What functions on the Web pages does daisy-chain support?
Please find in below table:
Summary
PDU
Source Status
Device Status
Outlet Status
Source Manager
Device Manager
Outlet Manager
Outlet Control
Outlet Schedule
Event Counts
Log
Status Records
Energy Records
Graphing
System
Identification