21
LED Indicators
Indicator
Status
Description
Source
Green
Power condition of the source is normal.
Red
Power condition of the source is abnormal.
Status
Green
The ATS PDU status is normal.
Orange
Warning.
Red
Critical.
Tx/Rx
Off
The ATS PDU power is off.
On (Green)
The ATS PDU power is on.
Flashing
Receiving/transmitting data packet.
Reset finished.
LINK
On
Indicates the ATS PDU is connected to the LAN.
Off
Indicates the ATS PDU is not connected to the LAN.
Outlet
On
The outlet is on and providing power.
Off
The outlet is off.
Environmental Monitoring (optional)
CyberPower ATS PDUs along with the environmental sensor
(ENVIROSENSOR) provide temperature and humidity monitoring in
a server closet and/or datacenter remotely. To connect the ATS PDU
with ENVIROSENSOR, use the RJ45 Ethernet Cable included with the
ENVIROSENSOR. Plug one end into the Daisy Chain (In)/ENVIROSENSOR
port on the ATS PDU and the other end into the RJ45 port on the
ENVIROSENSOR (as shown in figure below). When the ATS PDU correctly
connects to the ENVIROSENSOR, users can see the temperature and
humidity data via the Web Interface. For further information regarding
ENVIROSENSOR configuration, please refer to the Intelligent ATS PDU Web
Interface User’s Manual.
Device Reset
●
To locally reset all the settings to default, use Reset function in the LCD screen.
●
To remotely reset all the settings to default, log in to the Web interface,
enter the Reset page and apply the function.
Unattended/Automatic Shutdown
PowerPanel® Business (Remote) software automatically initiates a graceful
shutdown on the connected computer's operating system.
PowerPanel must be installed on every computer or server for which
the shutdown is to take place. The computer will receive a device status
message from the ATS PDU and will perform the shutdown according to the
instructions provided, including shutdowns at exact times and dates.
Follow the directions below for setting up Unattended/Automatic Shutdown.
Step 1. Computer Configuration
1. Install PowerPanel® Business (Remote) on every computer/server that
will be part of the shutdown process (Follow the instructions in the
PowerPanel® Business User Manual).
2. Configure the settings in PowerPanel® Business (Remote). See the
PowerPanel® Business User Manual for detailed instructions.
Step 2. ATS PDU Network Configuration
Verify that the IP address of all computers, that will be part of the shutdown
process, are included in the Client List on the web interface (Follow the
instructions in the PowerPanel® Business User Manual).
Step 3. Notification
Notifying the computers of potential outlet shutdowns can be accomplished
using the following functions:
●
Outlets Control Menu: Performing the task of turning off or rebooting outlets
●
Scheduling Menu: Setting the ATS PDU to perform the task of turning off or
rebooting outlets. The notification will occur prior to the scheduled date/time.
●
Outlet Overload: In the event of ATS PDU overload, notification will be sent
prior to the ATS PDU shutting down.
Operation
- Critical
- Warning
- Normal
Link
Tx/Rx
In / ENV
USB
Out
Serial
Enter
Select
Link
Tx/Rx
In / ENV
USB
Out
Serial