36
•
Community 2
You can enter a password for “Community 2” by typing it in the
Community 2
: text box. To set “community 2” to be read/write, then
click in the
write access
box. A checkmark appears. Leave it
unchecked to be read only.
Note:
If you are using “Community 2”, do not check the
Use
Concatenated Username&Password as Communities
box.
•
Trap IP Server
By default, the Trap Host IP is disabled.
To set the address of the Host
machine running SNMP management software to send traps to, enter
an address in the
Trap Host IP:
box. Leave the box empty to disable
traps.
•
System Name/Contact/Location
Enter
System Name
(Dualcom S name),
System Contact
(contact
person for Dualcom S), and
System Location
(Dualcom S location)
information in their respective boxes.
Note:
When done entering settings, click on
Save
to activate all changes.
GENERAL Setup
Behavioral settings, such as outlet change confirmations and refresh rates, can
be changed from this screen.
The following can be set from this screen:
•
Require confirmation to change outlets from web page
To avoid accidental on/offs, confirmation for each on/off event can be
required on the web. To enable this feature, click in the box next to the
Confirm outlet state changes over HTTP
option. A checkmark
appears.
Once enabled, the user is prompted for a confirmation each
time they try to change the state of an outlet.
Summary of Contents for Dualcom S
Page 1: ......
Page 3: ...iii CE certificate will go on this page ...
Page 7: ...vii Notes ...
Page 45: ...38 ...
