14
•
Day
(from 1-31)
•
Year
(full format i.e. 2004)
•
Time Zone:
(e.g. GMT – 08:00 = Pacific Standard Time)
•
NTP Server 1:
(Address of first NTP server)
•
NTP Server 2:
(Address of second NTP server)
Note:
The
Use NTP
option must be selected for the NTP Server
1 and NTP Server 2 settings to be operational. See step 5.
1) To change a value, navigate to the desired setting and press
Enter
.
2) Use
Backspace
and the number keys to change values. Press
Enter
when done.
3) Repeat steps 1 and 2 for each time/date setting to be changed.
4) To automatically compensate for Daylight Savings Time, navigate to
[ ] Daylight Savings Time
and press
Enter
. An
x
appears
indicating the option is active. Press
Enter
again to remove the
x
and disable the option.
5) To activate NTP (and automatically get the time/date from the
network server), navigate to
[ ] Use NTP
and press
Enter
. An
x
appears indicating the option is active. Press
Enter
again to remove
the
x
and disable the option.
Note
: It is highly recommended that a network NTP server be used.
6) Once all values and settings have been set, hit
Backspace
to return
to the System Settings screen.
NETWORK Setup
From the System Settings
screen,
type
2
to select
Network Settings
. The
following screen appears:
There are six Network settings that can be changed:
Summary of Contents for Dualcom S
Page 1: ......
Page 3: ...iii CE certificate will go on this page ...
Page 7: ...vii Notes ...
Page 45: ...38 ...