25
4. To change the High Current or High Grace period times, click in the box
next to either option and enter a new time.
5.
Click
Save Properties
when done.
Enabling Cyber Breaker® the Virtual Circuit Breaker™
Cyber Breaker® the Virtual Circuit Breaker™ provides protection for each
individual outlet, so if one is pulling too much current, only that outlet is tripped.
It also eliminates all uncertainties about when a circuit will trip.
Cyber Breaker® is not designed to protect against short circuits or major over
current conditions. If a circuit is shorted or if the current is too high above the
limit, the primary or branch circuit breaker will still be tripped.
To enable Cyber Breaker®, click the
Enable Virtual Circuit Breaker™
box. A
checkmark appears indicating the option is active. Click again to remove the
checkmark and disable the option.
Cyber Breaker®
trips the circuit if the current goes over the number of amps set
in the
High Current (Amps)
box for longer than the number of milliseconds set
in the
High Grace Period
box. The LED for that outlet turns red, indicating the
outlet is no longer functioning. To reset Cyber Breaker®, turn the outlet off and
then back on. The outlet will turn on.
Scheduling a Task
To set a scheduled task, select the clock icon
that corresponds to the outlet
to be scheduled. The following screen appears:
Add events by doing the following:
1. Enter a start time in the
at
hour and minute boxes. Be sure to specify
AM
or
PM
.
2. Select the day of the week from the
every
pull-down menu.
3. Click
Add Event
.
4. Click the checkbox to enable scheduling for this outlet.
5. Click
Save Schedule Options
.
Summary of Contents for Dualcom S
Page 1: ......
Page 3: ...iii CE certificate will go on this page ...
Page 7: ...vii Notes ...
Page 45: ...38 ...