16
There are three syslog settings and four e-mail settings that can be changed:
•
Syslog Server
(specify the IP address of your syslog server)
•
Log Facility
(specify the logging facility)
•
Log Level
(specify the level of logs you want to report)
•
E-mail Server
(specify the SMTP server name)
•
E-mail Address
(specify recipient of the notice)
•
From Address
(specify a name)
•
Subject
(specify a subject)
Note:
The
Send e-mail when log buffer is full
option must be
selected for the E-mail Server and E-mail Address settings to be
operational. See step 4.
1) To change any of the values, navigate to the desired setting and press
Enter
.
2) Use
Backspace
and the number keys to change values. Press
Enter
when done.
3) Repeat steps 1 and 2 for each network setting to be changed.
4) To have the log buffer e-mailed to you once it’s full, navigate to
[ ] Send
e-mail when log buffer is full
and press
Enter
. An
x
appears indicating
the option is active. Press
Enter
again to remove the
x
and deactivate
the option.
Note:
The
E-mail Server
and
E-mail Address
fields must be filled out
for an e-mail to be sent.
5) Once all values and settings have been set, hit
Backspace
to return to
the System Settings screen.
SNMP Setup
From the System Settings
screen,
type
4
to select
SNMP Settings
. The
following screen appears:
Summary of Contents for Dualcom S
Page 1: ......
Page 3: ...iii CE certificate will go on this page ...
Page 7: ...vii Notes ...
Page 45: ...38 ...
