32
(6) Coolant Temperature/Battery Volt-
age/Fuel Level Display — Displays
coolant temperature, battery voltage,
and fuel quantity. Press the Right But-
ton to change which parameter is
being displayed. Press and hold the
Right Button to see the actual values
associated with the mode selected.
NOTE: High engine RPM, low
vehicle speed, or heavy load can
raise engine temperature. Decreas-
ing engine RPM, reducing load, and
selecting an appropriate transmis-
sion gear can lower the tempera-
ture.
NOTE: Debris in the engine com-
partment (or packed between the
cooling fins of the radiator) can
reduce cooling capacity. Using a
garden hose, wash the radiator and
the engine to remove any debris
preventing air flow.
(7) Gear Position Indicator — Indicates
which gear is selected.
(8) Rear Axle Lock Indicator — Displays
an X between rear wheels when the
axle lock has been engaged. Displays
an O between rear wheels when the
axle lock is disengaged.
(9) Drive Select Indicator — Displays an
O between the front wheels when the
4x4 drive mode is selected by the
drive select switch.
(10) Seat Belt Reminder Indicator — Each
time the ignition switch is turned ON,
the indicator will illuminate on the
speedometer to remind occupants to
secure their seat belts.
(11) Engine Malfunction Indicator — A
diagnostic trouble code (see list) and
engine icon will be displayed on the
LCD information gauge whenever an
Engine Management error is detected.
The code and engine icon will con-
tinue to be displayed on the LCD
information gauge until the error is
corrected.
MOD102A
NOTE: Take the vehicle to an
authorized Cushman dealer to have
the error corrected and the system
error reset as soon as possible.
CAUTION
Continued operation with high engine
temperature may result in engine
damage or premature wear.
CAUTION
Cushman does not recommend using
a pressure washer to clean the radia-
tor core. The pressure may bend or
flatten the fins causing restricted air
flow, and electrical components on
the radiator could be damaged. Use
only a garden hose with spray nozzle
at normal tap pressure.
! WARNING
The seat belt indicator and audible
alarm are a reminder and will turn off
after the operator’s seat belt is
secured. It does not indicate that all
seat belts are properly secured. It is
the operator’s responsibility to
ensure all vehicle occupants are
properly seated with seat belts
secure. Serious injury or death could
occur as a result of falling outside a
moving vehicle.
Summary of Contents for Hauler 4x4 Crew Diesel 2019
Page 1: ......
Page 67: ...65 Maintenance Record DATE MILEAGE SERVICE PERFORMED NOTES...
Page 68: ...66 NOTES...