Cushman Hauler 4x4 Crew Diesel 2019, Operator'S Manual

Page: 32 / 72

30
To access behind-the-seat storage, turn
the 1/4-turn fastener clockwise and tilt
the seat backrest forward.
MOD121A
The storage compartment is designed to
be a perfect fit for the passenger seat bot-
tom(s).
1. Fold the passenger seat backrest(s)
down and place the seat bottom(s)
into the marked holding position(s) in
the storage compartment.
MOD151A
Power Steering (if
equipped)
Certain vehicles were produced with an
Electronic Power Steering (EPS) system
to reduce steering effort and operator
fatigue over a broad range of operating
conditions.
The EPS system engages when the igni-
tion switch is turned to the ON position
and disengages after approximately five
minutes (to conserve battery power) if
the engine is not running.
This system is entirely maintenance-free:
no adjustment or servicing is required.
There are no fluids to check or change,
and the EPS system is entirely self-con-
tained and sealed to protect it from the
elements.
The EPS system is battery system pow-
ered; therefore, the battery must be in
good condition and fully charged. Power
delivery and overload protection is pro-
vided by an EPS relay and 30-amp fuse
located under the hood in the Power Dis-
tribution Module (PDM).
The system is self-monitored and will
display a malfunction code on the LCD
information gauge should an EPS system
control circuit problem occur.
Code Fault Description
C1351 Motor Position Index
C1352 Motor Position Plausibility
C1353 Motor Position Range
C1354 Internal Voltage Supply
C1355 Session Error
C1356 Torque Sensor Open Circuit
C1357 Torque Sensor Range
C1358 Torque Sensor Over Range
C1359 Torque Sensor Communication
C1360 Internal Processor Error
C1361 Temperature Sensor Circuit
C1362 Stuck at Bootloader
C1363 Calibration Values Not Programmed
C1364 Calibration Checksum
C1365 Application Checksum
C1366 Variant Coding Error
C1367 Vehicle Speed
C1368 ECM CAN Bus Error
C1369 Gauge CAN Bus Error
C1370 CAN Bus Error
C1371 Over Temp Condition
C1372 Battery Voltage Low
C1373 Battery Voltage High
C1374 Over Current Error
C1375 System Voltage High
C1376 Current Sensor Range