G-Sensor Option for e-Con2\
This is an optional unit to be used with e-Con2 Suspension Controller System and will not function as
stand-alone unit.
Installation Guide
Package Content:
G Sensor Main Unit
1
Double Sided Adhesive
1
Installation Manual
1
Precautions for Use
This is precision equipment, please treat with care
This unit requires a certain amount of labor in modifications to your vehicle, and professional installation is
recommended which may incur additional costs by the installer.
Any installation error will not be covered under warranty
Remove all electrical power supply to the vehicle including all batteries, and capacitors. Be also aware that some
settings may be lost in vehicle computers, audio/video, clocks, etc
…
Avoid installations in places of direct sunlight, excessive heat or electrical interference, and harsh impact.
Secure all controller, box and harness in such way that it will not detach or impede upon driving, and securely mount
the unit so that the display is legible and not difficult to control.
Be careful to feed and place, all wires and sockets carefully so as not to be shorted, cut, or stripped.
Be sure to take caution on electrical wire and socket handling, and disconnect all power and electrical components
before working with the electrical wire harnesses.
Take caution when using excessive water such as for cleaning engine bay and make sure that the motor unit and
harness does not get excessively wet or become submersed.
Please do NOT make any modifications to the unit, or use it on products other than recommended Cusco shock
absorbers which are compatible.
