eCon2 Overall Control Flow Diagram (Vertical)
Ignition On
Initial Calibration
Push both buttons and hold while powering on ignition
Control Panel Display On
Control Panel Off
Key Lock On/Off
= Key Lock Icon
SHINE = Display Options Mode
SHINE Mode Icon
Brightness
Daytime Setting
OK
N
ight Setting
(with parking lamp on
)
OK
Change
OK
OVERALL
CONROL
MODE CHANGE
SONAR = Automated Module Control Mode
Demonstration Screen
(6 Patterns)
With optional G-Sensor
G-Sensor Demo Screen
(6 Patterns)
G-Sensor Mode
G-Peak Memory
Display Hi/Low Range
G-Sensor Reset
RESET
Longitudinal /
Lateral G Peak
SWITCH = Options Setup Mode
Sonar Mode Icon
OK
OK
Switch Mode Icon
Display Vertical/Horizontal
OK
Warning Alarm Sound
OK
OK
Keypad Sound
Back to
Shine Mode
Shock Mode = Shock Absorber Basic Control
Shock Mode Icon
Front Shock Absorber
Rear Shock Absorber
Memory Recall
Memory Set
System Reset
Hard 1 Step
Soft 1 Step
Multiple
Step by
Long Hold
OK
Automatically Selected
After 2 second pause
Automatically Selected
After 2 second pause
Hard 1 Step
Soft 1 Step
Multiple
Step by
Long Hold
OK
Repeat Push to
Recall Memory
Automatically Selected
After 2 second pause
Cancel
Memory Enter
Select Memory
Bank Number
System
Reset
Push and Hold
Short Push
** Use the buttons according to the icons shown here
On/Off
On/Off
Horizontal
Display
Vertical
Display
Low Range
High Range
Color
