Installation
Procedures
*** This unit is to be mounted completely horizontal and
directional with the label shown. There is a gyro sensor inside
the unit that needs to be positioned correctly to sense the
dynamic motions of the vehicle correctly
Please take a look at this label on the unit, and position it and
mount the unit securely on a clean surface.
Be sure to power off all connection and vehicle electrical supply.
Connect the sensor harness to the socket labeled SENSOR as shown on the back of the e-Con2
Main Control Module.
When all connections and secured and G-Sensor unit is securely mounted, power on the vehicle and
confirm that the G-Sensor Mode operation is available and functioning properly in the e-Con2 Main
Controller.
