CAB INSTALLATION
6 of 29
STEP 4: (SIDE FRAMES)
4.1
With assistance, remove the left door from the left side
frame by unlatching at the middle handle and lifting the
door off the hinges. Remove the 2 brass washers from
the side frame and set aside for later use. Position the
left side frame in place and loosely secure to the left
rear leg. See Figure 4.1.
Hardware Used
Qty
5/16
-
18 X 3/4 Hex Head Screw
6
Tools required
1/2”
wrench or socket
4.2
Secure the left side frame to the floor pan through the
hole from the fir tree plug removed earlier. See Figure
4.2.
Hardware Used
Qty
1/4
-
20 X 3/4 Button Head Screw
1
1/4
-
20 Hex Nut
1
Tools required
5/32”
Allen Wrench
7/16”
wrench or socket
4.3
Repeat step 4.1 for the right side frame.
Hardware Used
Qty
5/16
-
18 X 3/4 Hex Head Screw
6
Tools required
1/2”
wrench or socket
4.4
Secure the right side frame to the floor pan through the
floor mat hole punched earlier and the aluminum
spacer. See Figure 4.4.
Hardware Used
Qty
M8x1.25 X 35mm Button Head Screw
1
Tools required
5mm Allen Wrench
Fig. 4.1 (Install Left Side Frame)
Fig. 4.2 (Install Left Side Frame)
Fig. 4.4 (Install Right Side Frame)
5/16
-
18 x 3/4
Screws
1/4
-
20 X 3/4 Button
Head Screw
1/4
-
20 Nut
M8x1.25 X 35mm
Button Head Screw
