CAB INSTALLATION
13 of 29
STEP 16: (PRE
-
ASSEMBLE HEATER)
16.1
Remove the heater screws shown in Figure 16.1 and
reuse to attach the heater brackets to the sides of the
heater box. Tighten hardware.
Tools required
#2 Phillips Screw driver
16.2
Apply
1/4”
wiring loom to the heater wires. See Figure
16.2.
Fig. 16.1 (Pre
-
Install Heater Brackets)
Fig. 16.2 (Apply Loom to Heater Wires)
Connect and cover
1/4”
Loom
Reuse
Screws
Reuse
Screws
STEP 17: (INSTALL HEATER)
17.1
Install the 2 supplied plastic snap bushings in the right
cab floorboard. See Figure 17.1.
17.2
Attach the heater to the cowl. See Figure 17.2.
Hardware Used
Qty
1/4
-
20 x
5/8”
Hex Head Screw
4
Tools required
3/8”
socket or wrench
Snap Bushings
1/4
-
20
Screws
1/4
-
20
Screws
Fig. 17.1 (Install Snap Bushings)
Fig. 17.2 (Install Heater)
