CAB INSTALLATION
5 of 29
STEP 3: (REAR LEG AND ROPS
MOUNTS)
3.1
Slide on the lower ROPS clamp (taller one) onto the
ROPS just above the flasher bracket. See Figure 3.1.
3.2
With help, attach the left rear leg assembly to the lower
ROPS clamp as well as adding an upper ROPS clamp.
Leave hardware loose at this time. See Figure 3.2.
Ensure there is a gap between the rear leg and the
fender.
Hardware Used
Qty
5/16
-
18 X 3/4 Hex Head Screw
8
5/16
-
18 Hex Nut
8
Tools required
1/2”
wrench and socket
3.3
Repeat steps 3.1 and 3.2 for right rear leg.
Fig. 3.1 (Slide On Lower ROPS Bracket)
Fig. 3.2 (Install Left Rear Leg)
Fig. 2.1 (Pre
-
Assemble ROPS Mount to Rear Leg)
STEP 2: (PRE
-
ASSEMBLE REAR LEG)
2.1
Pre
-
assemble the left rear leg and a ROPS mount. See
Figure 2.1.
Hardware Used
Qty
5/16
-
18 X 3/4 Hex Head Screw
2
5/16
-
18 Hex Nut
2
Tools required
1/2”
wrench and socket
2.2
Repeat step 2.1 for right rear leg.
Gap
ROPS Mount
Larger ROPS Clamp
Larger
ROPS
Clamp
Smaller
ROPS
Clamp