Curtis Dyna-Fog 2742, Manual

Page: 38 / 84

PREPARING THE BATTERY FOR STORAGE
Disconnect positive (+) and negative (-) battery cables and wrap cable ends with electrical tape.
Remove battery and store in a cool dry area.
CAUTION
WHEN DISCONNECTING OF THE BATTERY IS
REQUIRED, REMOTE NEGATIVE (-) CABLE FIRST.
PREPARING THE FRAME ASSEMBLY FOR STORAGE
The frame should be wiped down with IsopropyI Alcohol and dried. If original shipping
carton is not available the unit should be covered with a tarpaulin or plastic sheet.
WARNING
It is against Federal Law to ship insecticides and
flammable liquids in an unmarked, non-D.O.T. approved
container without proper labeling and U. N. number.
If for any reason it becomes necessary to return your
machine to our Factory, make certain that the
Formulation and Fuel Tanks have been and flushed as
described above. If a machine is received that has not
been drained and flushed, a service fee will be charged
for doing so.
38