4
44
CUES Inc.
,
MPlus+ User Manual | CH905
www.cuesinc.com
,
OPERATING THE SYSTEM
SIMULTANEOUS PAN/TILT
NO
YES
SIMULTANEOUS PAN/TILT
WIRELESS VIDEO TRANSMITTER
TURN POWER ON
TURN POWER OFF
SET START-UP POWER STATE
RECEIVER PAIRING
WIRELESS VIDEO TRANSMITTER
WVT START-UP POWER STATE
OFF
REMEMBER LAST
ON
WVT START-UP POWER STATE
(Note: Turns on/off an optional accessory)
The pan and tilt motors can be run simultaneously (default), or independent of one another.
Selecting OFF will set the POWER STATE at start-up to OFF. This means that the operator will
have to move to the WIRELESS VIDEO TRANSMITTER MENU and TURN POWER ON whenever he
wishes to use the wireless video transmitter.
Selecting ON will set the POWER STATE at start-up to ON. The operator will never have to move to
the WIRELESS VIDEO TRANSMITTER MENU again to turn power on. Note that this can impact the
battery life if the wireless video transmitter is not needed regularly.
Selecting REMEMBER LAST will cause the system to remember the setting when it is turned off
and then use that setting the next time that the system is powered up. This is useful if the operator
wants to have the wireless transmitter on until he specifically wants it off or alternately, wants to
have the wireless transmitter off until he specifically wants it on.
SYSTEM MENU
WVT PAIRING
** PAIRING NOT REQUIRED **
ID
ON |
| | |
| | |
OFF | |
|
| | |
|
1 2 3 4 5