3
24
CUES Inc.
,
MPlus+ User Manual | CH905
www.cuesinc.com
,
SET-UP & INSTALLATION
CONFIGURING THE COILER AND PUSH CABLE
Note: The following configuration procedure must be followed after all system related
service, push cable service and/or retermination, push cable replacement or if coiler is
being interchanged
Enter “Coiler Setup” in the System Menu and confirm or configure PUSH ROD
LENGTH, COILER TYPE and COUNT DIRECTION.
• PUSH ROD / CABLE LENGTH
• XXX.X - NOTE: enter actual length to one decimal place using the Up Arrow and
Down Arrow keys to modify the value in the field displayed. Use the Left Arrow and
Right Arrow keys to move within the field. The value is changed upon exiting from
the field by pressing <ENTER> or <ESC>.
• Prior to changing the push rod or cable’s length, all of the cable must be inside the
basket/coiler because the firmware assumes this is the case when computing the
footage distance.
COILER SETUP
COILER TYPE
PUSH ROD / CABLE LENGTH
AUX. REEL SCALING COUNT
COUNT DIRECTION
COILER SETUP
COILER TYPE
WARNING: ALL CABLE MUST
BE IN BEFORE PROCEEDING!
STANDARD BASKET
XL BASKET
AUXILIARY REEL
COILER TYPE
