3
10
CUES Inc.
,
MPlus+ User Manual | CH905
www.cuesinc.com
,
SET-UP & INSTALLATION
ELECTRICAL & PHYSICAL CONNECTIONS - STANDARD AND “XL” SYSTEMS
To reduce the risk of equipment damage, please read the following instructions prior to
operating the system. Ensure that all of the equipment is turned to the OFF (O) position
prior to connecting the MPlus+ system. Inspect all of the cables and connectors for
cuts or worn areas prior to operating the equipment. Repair or replace worn cables
immediately.
PROCEDURE: Connecting the System
Power Source:
The MPlus+ can be powered from the built-in, rechargeable battery, 110 AC mains
power, or 12 VDC power. If the internal battery is not going to be utilized, connect the
unit to one of the external power sources listed above.
Camera Centering Ball (Standard System Only):
Ensure the centering ball, if needed, is attached to the mini camera as shown in this
chapter.
Mini-Camera (Standard or “XL” System):
Ensure the mini-camera is connected and secured to the CX-1 cable end as shown in
this chapter.
Adjustable Handle Height (Standard System Only):
The MPlus+ includes a height-a
djustable handle for portability with cam locks and button
stops. Refer to the handle height adjustment instructions in this chapter.
Debris Bag (Standard System Only):
An optional debris bag is provided to prevent debris from spilling/leaking out during
and after the inspection. Ensure the debris bag is attached to the MPlus+ per the
instructions in this chapter.
Adjustable Cable Guide:
Ensure the push cable is inserted through the cable guide for
the most efficient operation.
Accessory Bag (Standard or “XL” System):
An optional accessory bag is available to store additional items, as needed. Ensure the
accessory bag is attached to the MPlus+ per the instructions in this chapter.
Monitor (Standard or “XL” System):
Ensure that the Control Unit cable is connected as shown in this chapter.
