70
Gateway(config)# dialing-setting
first-digit [1-60]
[1-60]
Specify the time for first-digit timeout in
second. If a user picks up the handset
without dialing a call within this specified
time, the dialing tone will be changed to
busy tone.
Gateway(config)# dialing-setting
hold-call-key [**| *# | *1 | *2 |*3
|*4 |*5 |*6 |*7 |*8 |*9 ]
[**| *# | *1 | *2
|*3 |*4 |*5 |*6 |*7
|*8 |*9 ]
Select the key from the drop-down menu.
When the selected keys are pressed, a call
will be put on hold. To resume a call,
please press FlashHook.
Gateway(config)# dialing-setting
inter-digit [1-20]
[1-20]
Specify the time for inter-digit timeout in
the text box. This is the time value allowed
between two digits that are entered.
Gateway(config)# dialing-setting
new-call-key [**| *# | *1 | *2 |*3
|*4 |*5 |*6 |*7 |*8 |*9 ]
[**| *# | *1 | *2
|*3 |*4 |*5 |*6 |*7
|*8 |*9 ]
Select the key from the drop-down menu.
When hook flash is pressed on a call, the
new call key will be activated and a new
call will be dialed by pressing the selected
key(s).
Gateway(config)# dialing-setting
three-way-key [**| *# | *1 | *2 |*3
|*4 |*5 |*6 |*7 |*8 |*9 ]
[**| *# | *1 | *2
|*3 |*4 |*5 |*6 |*7
|*8 |*9 ]
Select the key from the drop-down menu.
When hook flash is pressed on a call, the
three-way conference key will be activated
and a three way conference call will be
initiated by pressing the selected key(s).
You can follow the procedures below to
begin a three-way conversation.
Gateway(config)# dialing-setting
transfer key
Select a key from the drop-down menu.
When hook flash is pressed on a call, the
transfer key will be activated and a call will
be transferred by pressing the selected
key(s). You can follow the procedures
below to transfer a call.
Gateway(config)# dialing-setting
send
Tick the checkbox to enable this function.
And when it is enabled, you have to dial “#”
after every phone number.
Gateway(config)# voice fax
Voice [1-2] [1-4]
[1-2]
Specify FAX port number.
[1-4]
Specify T.38 option.
1: Voice. Voice data will be transmitted in
accordance with CODEC priority defined in
“Voice Setting”.
2: T.38 FAX Relay. The Residential
Gateway will send fax messages as UDP
or TCP/IP packets. This option provides
better quality. However, the peer device
must use T.38 as well.
3: Voice and T.38 FAX Relay. Voice will be
transmitted with the defined CODEC
priority and fax messages will be sent with
T.38.
4: Voice and FAX Pass Through. Voice will
be transmitted with the defined CODEC
priority and fax messages will be sent with
G.711/Ulaw.
