46
The default value is 80.
Gateway(config)#
management cwmp-agent
Enable CPE WAN Management Protocol
function.
Gateway(config)#
management cwmp-agent
apply
Submit your settings after you finish
configuring CWMP.
Gateway(config)#
management cwmp-agent
connection-request
password [password]
[password]
Specify the password for Connection
Request Server.
Gateway(config)#
management cwmp-agent
connection-request
username [username]
[username]
Specify the username for Connection
Request Server.
Gateway(config)#
management cwmp-agent
management-server
password [password]
[password]
Specify the password for Auto
Configuration Server.
Gateway(config)#
management cwmp-agent
management-server
username [username]
[username]
Specify the username for Auto
Configuration Server.
Gateway(config)#
management cwmp-agent
management-server url [url]
[url]
Specify HTTP address of the Auto
Configuration Server.
Gateway(config)#
management cwmp-agent
parameter-change notify
Enable or disable Periodic Information
function. It defines the time interval that a
piece of information will be sent after a
communication session is done.
Note:
If a communication session has
been incomplete for long time, the time
interval will start counting at the beginning
of communication session.
Gateway(config)#
management cwmp-agent
parameter-change notify
interval [1-86400]
Specify the time in second after which a
piece of information will be sent again.
The default value is 60.
No command
Gateway(config)# no
management access-
control lan
Deny the computers to manage the
Residential Gateway from its LAN ports.
Gateway(config)# no
management access-
control lan snmp
Deny the SNMP management access on
LAN port.
Gateway(config)# no
management access-
control lan telnet
Deny the Telnet management access on
LAN port.
