61
No.)# no proxy port
Gateway(config-account-
No.)# no server address
Set server address to default.
Gateway(config-account-
No.)# no server port
Set server port to default.
Gateway(config-account-
No.)# no username
Set user name to default.
Show Command
Gateway(config-account-
No.)# show
Show the information of the account.
Gateway(config)# show sip
Show SIP configuration
Gateway(config)# show sip
account
Show SIP account configuration.
Gateway(config)# show sip
status
Show SIP status.
2.5.11 SNMP Command
1. Create a SNMP community and set up detailed configurations for this community.
Command
Parameter
Description
Gateway(config)# snmp-
server community
[community]
[community]
Specify a SNMP community name of up to
20 alphanumeric characters.
Gateway (config-
community-NAME)# active
Enable this SNMP community account.
Gateway(config-community-
NAME)# description
[Description]
[Description]
Enter the description for this SNMP
community of up to 35 alphanumerical
characters.
Gateway(config-community-
NAME)# level [admin | rw |
ro]
[admin | rw |
ro]
Specify the access privilege for this SNMP
account.
admin:
Full access right, including
maintaining user account, system
information, loading factory settings, etc..
rw:
Read & Write access privilege. Partial
access right, unable to modify user
account, system information and load
factory settings.
ro:
Read Only access privilege.
No command
Gateway(config)# no snmp-
server community
[community]
[community]
Delete the specified community.
Gateway(config-community-
NAME)# no active
Disable this SNMP community account. In
this example
“mycomm” community is
disabled.
