26
Gateway(config-net-PORT-
PORT)# vlan dot1q-vlan mode
Undo VLAN mode configuration.
Gateway(config-net-PORT-
PORT)# no vlan dot1q-vlan
mode trunk native
Undo VLAN trunk native mode
configuration.
Show command
Gateway(config-net-PORT-
PORT)# show interface
Show the current status of each port.
Gateway(config-net-PORT-
PORT)# show dot1q-vlan tag-
vlan
Show IEEE802.1q tag VLAN table.
10. Set up WiFi advanced settings.
For Bandwidth 5G:
Command
Parameter
Description
Gateway(config)# interface
wlan1
Access WiFi bandwidth 5G advanced settings.
Gateway(config)# interface
wlan1 apply
Apply all change made on WiFi bandwidth 5G
advanced settings.
Gateway(config-wlan1)#
aggregation
Enable Aggregation function.
Gateway(config-wlan1)#
beacon-interval [20-1024]
[20-1024]
Specify the Beacon Interval threshold in ms
ranging between 20-1024. The default value is
100.
Gateway(config-wlan1)#
channel [channel_number]
[channel_number] Specify the channel number from the list shown
below:
Channel Number: auto, 36, 40, 44, 48, 52,
56, 60, 64, 100, 104, 108, 112, 116, 120, 124,
128.
Gateway(config-wlan1)#
channel width [20|40|80]
[20|40|80]
Specify the channel width in MHz.
Gateway(config-wlan1)#
fragment-threshold [256-
2346]
[256-2346]
Specify the fragment threshold ranging
between 256-2346. The default value is 2346.
Gateway(config-wlan1)#
iapp
Enable IAPP function.
Gateway(config-wlan1)#
ldpc
Enable LDPC function.
Gateway(config-wlan1)#
multicast-rate [auto|1-44]
[auto|1-44]
Specify the number corresponding its data rate
respectively as below:
1:6m
2:9m
3:12m
4:18m
5:24m
6:36m
7:48m
8:54m
9:msc0
10:msc1
11:msc2
12:msc3
13:msc4
14:msc5
15:msc6
16:msc7
17:msc8
18:msc9
19:msc10 20:msc11
21:msc12 22:msc13 23:msc14 24:msc15
25:nss1-
26:nss1-
27:nss1-
28:nss1-
