70
CHAPTER 4
PROVISIONING VIA WEB BASED MANAGEMENT
The 'Advanced Functions' for this device are detailed in Chapter
3.6 Advanced Functions.
Accept Remote H/W Reset
: When enabled, this device will reset when the request is received
from the remotely connected
100AS-1
.
UPnP
:
100AS-1
may enable the Universal Plug ‘n Play protocol to allow IP discovery via this
protocol. The default is disabled.
Maximum OAMPDU Size
: The PDU size may be set on the OAM active unit. The default and
recommended size is 1500 bytes.
QoS Priority Mode
:
100AS-1
supports either weighted or strict QoS setting. The default is weighted.
Buttons
Apply Parameters:
Until this button is pressed, no changes are actually performed.
H/W Reset:
This will reboot the CPU and reset the switch chip. Use with caution as traffic is
blocked during a reset operation until the OS has booted and switch chip re-initialized.
All Set to Default:
Very simply, the device is reset to factory default settings.
Refresh Status:
Updates the display with current information.
Remote H/W Reset:
Provides ability to reset device at remote side, if the device is configured to so
allow.
Summary of Contents for FRM220-100AS-1
Page 1: ...1 FRM220 100AS 1 Fast Ethernet OAM IP Media Converter...
Page 82: ...This page intentionally left blank...
Page 83: ......
