21
CHAPTER 3
PROVISIONING VIA TEXT MENU
There are up to eight entries that can be filled for individual syslog server destination IP addresses.
Press any number key, 1 through 8 and key in the syslog server’s IP address. Press the <D> key to
delete all entries. Using <ESC> will automatically save the settings and exit to a higher level menu.
Press <ESC> twice to exit back to the Main Menu.
3.4.4 Date & Time Setup
The date and time setup are important so that any trap messages generated by the SNMP agent
will have the correct timestamp.
100AS-1
supports setting time manually or automatic time
configuration through the use of
NTP
(Network Time Protocol) or
SNTP
(Simple Network Time
Protocol).
From the Main Menu, select the <S> (System Configuration) and from this menu select <T> (Date
and Time).
<1>
Adjust Current Time:
Use this menu item to manually adjust the date and time. It is important
to note that
100AS-1
does not provide any clock backup (battery) mechanism. Manual settings of
time are lost in the event of a power failure. Therefore, it is highly recommended that time be
synchronized to network time.
<2>
Set Time Server IP:
The time server IP is the IP address of a NTP server that provides time
synchronization services on a network. Geographically close servers should be chosen from the
pool of NTP servers.
<3>
Set Time Zone:
All network time is synchronized to UTC (Coordinated Universal Time) which is
based on International Atomic Time. The time zone setting will let the UTC time appear correctly
for your geographic location. Time zone settings are + (East) or – (West) full or half hours from UTC
coordinates or previously known as GMT (Greenwich Mean Time).
<4>
Enable/Disable Auto Synchronize Time:
When auto synchronization is enabled, the SNTP
daemon in
100AS-1
will poll and update time from the time server once every hour.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-100AS-1 Ver:1.005 ***
*********************************************
<< Date and Time >>
Current Date And Time [1970-01-01/01:20:45 Thu]
Time Server IP [220.130.158.71]
Time Zone [GMT +00:00]
Auto Adjust Time [Disable]
<1> :Adjust Current Time.
<2> :Set Time Server IP.
<3> :Set Time Zone.
<4> :Enable/Disable Auto Synchronize Time.
<5> :Synchronize Time with NTP Server.
<ESC>:Go to Previous Menu.
Summary of Contents for FRM220-100AS-1
Page 1: ...1 FRM220 100AS 1 Fast Ethernet OAM IP Media Converter...
Page 82: ...This page intentionally left blank...
Page 83: ......
