CTC Union FRM220-100AS-1, User Manual

Page: 7 / 83

7
CHAPTER 1
INTRODUCTION

Far End Fault Indication (FEFI)

Paused Frame flow-control

Digital Diagnostic (DOM) SFP support

OAM PDU and per port RMON counters

SNTP client
WARNING : Fiber optic equipment may emit laser or infrared light that can injure your eyes. Never
look into an optical fiber or connector port. Always assume that fiber optic cables are connected
to a laser light source.
1.4 Product Specifications

Optical Interface

Connector SFP cage x 1

Data rate 100Mbps

Duplex mode Full duplex

Fiber MM 50/125um, 62.5/125um
SM 9/125um (depending on SFP)

Distance MM 550M/2KM,
SM 15/30/50/80/120KM (depending on SFP)

Wavelength Depends on SFP

Electrical Interface

Connector RJ-45 x 1

Data Rates 10Mbps, 100Mbps (auto or forced)

Duplex Full or Half Duplex

Cable 10Base-T Cat. 3, 4, 5, 5e UTP
100Base-TX Cat. 5, 5e or higher

Standards IEEE802.3, 802.3u, 802.3ah
802.3x, 802.1W, 802.1p, 802.1Q, RFC 4330 (SNTP)

Maximum MTU 10240 bytes

MAC Table 1024

VLAN Groups 64

Indicators LED (PWR, Fiber Link, Test, UTP Link, UTP Speed, FEF)

Power (Card supports hot-swapping)
Input Card: 12VDC, Standalone: AC, DC options
Consumption < 5W

Dimensions 155 mm (D) x 88 mm (W) x 23mm (H)

Weight 130g

Temperature -5°C ~ 45°C (Operating), -5°C ~ 45°C (Storage)

Humidity 5% ~ 95% non-condensing

Certification CE, FCC, LVD, RoHS

MTBF 65000 hours