CTC Union FRM220-100AS-1, User Manual

Page: 37 / 83

37
CHAPTER 3
PROVISIONING VIA TEXT MENU
Select <2>
Create . to create a VLAN ID.
Enter the VLAN ID. Then press “Enter” key. The following image appears.
Some Tagging definitions:
<1> Unmodified : This means that packets exiting the assigned port will still have the same tag as
when they entered any other port of the switch, i.e., unmodified.
<2>
Untagged : This means that any packets exiting the assigned port will have all tag information
removed.
<3>
Tagged : This means that packets exiting the assigned port will have the packets tagged with
the VID assigned to that port.
<4> NonMember : When a port is not a member of a VID, packets tagged with that VID will not be
allowed to exit that port.
When assigning static VLAN ID, any ID from 1-4094 can be chosen. However, the maximum
number of VID table entries for
100AS-1 is 64 static VLANs.
Operate:[Create] VLAN ID:[ ]
...............................................................................
Operate VLAN Table: Select VLAN ID.
<ESC>:Previous Page.
Please Input 1 ~ 4094 :[ 1]
Operate:[ ]
.....................................................................
Operate VLAN Table: Select Operation.
<1> Modify <2> Create <3> Delete
<ESC>:Discard and Return.
Operate:[Create] VLAN ID:[ 1]
Port 1:[ ],Port 2:[ ],Port 3:[ ],Port 4:[ ]
...............................................................................
Operate VLAN Table: Select Port 1 Membership.
<1> UnModified <2> UnTagged <3> Tagged <4> NonMember
<ESC>:Previous
Page.