CT Lab Impedo DUO User Manual Download

Page: 86 / 119

Impedo

DUO

User Guide

5.14

Manage Data

Figure 50:

Manage Data

provides manual data management options

The Impedo Duo manages its internal storage using Space Reclaimer (see Section
5.7.3.1).

Manage Data

provides the user with the manual data management options

as described in Table 6. Select the desired option and press

Delete

Table 7:

Manage Data

delete options

Description

Clarification

Delete all meter points and associated
data

All meter points, and their data
including configurations will be deleted

Delete meter point and associated data

The specified meter point, including its
data and configurations will be deleted.
Other meter points will not be deleted

Delete segment

Only the specified data segment for the
specified meter point will be deleted

Delete data range

Only data within the specified date
range for the specified meter point will
be deleted

Summary of Contents for Impedo DUO
























































































































Search results

Summary of Contents for Impedo DUO

Reviews:

Related manuals for Impedo DUO

Brands by name

Popular brands

CT Lab Impedo DUO, User Manual

Search results

Summary of Contents for Impedo DUO

Reviews:

Related manuals for Impedo DUO

Brands by name

Popular brands