CT Lab Impedo DUO, User Manual

Page: 67 / 119

Impedo DUO User Guide
67
5.7.3.4.2 Write Password
If set, applications that perform state changing actions ( Preferences , Registration ,
Meter Config , Manage Data ) will require this password before opening. This
password can be used when the instrument is in Standalone mode, and it is required
that data may be viewed, but no changes made to the instrument. By default it is
empty.
5.7.3.4.3 Modbus Password
The Modbus subsystem uses this password during authentication.
5.7.4 Time Zone
Figure 30: Time zone configuration
The time zone setting configures the time zone used to display time and dates on the
UI (e.g. on the date and time OLED status area). The time zone setting will not
influence the dates of captured data in any way.
To configure the time zone, first select the area of the time zone, and then the
location. Then select save. The OLED display should update to reflect the selected
time zone.