CT Lab Impedo DUO, User Manual

Page: 84 / 119

Impedo DUO User Guide
84
5.13 Export
Figure 48: Export allows the user to export data to a USB stick
Data captured on the Impedo Duo can be exported to a USB device using Export . Plug
a FAT32 formatted USB device into either USB port 1 or 2. Select the desired USB
device from the drop-down. If the device was used to export data before, the last
export date will be shown. If the device was not used before, the date will show as
N/A (not available). The user may choose to export all data, or export from a specific
date. Click
Export to start the export process. A dialog will appear showing the
progress of the export. The export can be safely aborted, and the data exported up
to that point will be on the USB device. The user can select which harmonics to
export from the harmonic selection tab (see Figure 49). This selection is persisted to
the USB device and will be used when the device is plugged into the Impedo Duo on
a next occasion. Exporting data using this method is a slow process – exporting an
entire 100% filled storage chunk will take several hours.
Should the user wish to use a mass storage device, the instrument can be configured
to continually export data to the mass storage plugged at one of the USB ports. The
“Continue Export” option will only be available after exporting some data to the mass
storage.