CT Lab Impedo DUO, User Manual

Page: 8 / 119

Impedo DUO User Guide
8
The instrument complies with the IEC60529 protection standard:

Penetration of dust & water: Class I

IP Rating: IP52

Inadvertent contact
1.3 General Safety Information
Installation and maintenance of the instrument should only be performed by a
qualified and certified electrician/technician with appropriate training and
experience with high voltage and current devices.
The instrument must be installed in accordance with the approved national electrical
codes.
If the instrument is used in a manner not specified by the manufacturer, protection
from electric shock, fire, etc. provided by this equipment may be compromised.
When the instrument is in operation, dangerous voltages will be present in certain
parts of the equipment. Failure to observe warning notices, incorrect use, or
improper use may endanger personnel and the instrument and also cause personal
injury or physical damage. The standard safety precautions must be followed while
performing both the installation and service work.
The terminals exposed during installation, commissioning and maintenance may
present a hazardous voltage unless the equipment is electrically isolated. Failure to
properly isolate the instrument can create a risk of electric shock, injury or death.
Failure to earth the instrument will compromise the correct functioning of the
internal protection circuitry of the instrument.
The user must inspect the instrument and all accessories before use; attention must
be placed on inspecting:

Damage to instrument and accessories – do not use any damaged
equipment.

The rating of the input terminals – Do not apply input voltages above the
rating of the Instrument.
Do not expose the instrument to extreme moisture and or rain. Avoid use should the
instrument be exposed to moisture/rain.
The digital output of the instrument must not be used for primary protection